s40 software

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
joe nacey
Posts: 11
Joined: Sun Jan 25, 2015 7:40 pm
ECU Model: No ECU

s40 software

Post by joe nacey »

Hi i have a new s40 just wondering what software do i have to download onto my laptop in order to plug into it.. thanks
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: s40 software

Post by Rob Stevens »

joe nacey
Posts: 11
Joined: Sun Jan 25, 2015 7:40 pm
ECU Model: No ECU

Re: s40 software

Post by joe nacey »

Ok i have downloaded it but i cant seem unzip it or open it...
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: s40 software

Post by Rob Stevens »

Oh, that's not a good start! If you double click on the downloaded file it should open up to 4 files, then double click on setup.exe and follow the instructions.
corsaboy
Posts: 70
Joined: Tue Jul 26, 2011 10:55 am
ECU Model: S40 Pro
Firmware Version: 79
Location: The Netherlands
Contact:

Re: s40 software

Post by corsaboy »

what Operating System do you use?
Here it's working on Windows XP, Windows 7 and Windows 8.1

Did download the same file for three weeks ago and did an update on all my systems without problem
Vauxhall Corsa C20XE Powered by Eaton M90
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: s40 software

Post by Alex DTA »

corsaboy wrote:Here it's working on Windows XP, Windows 7 and Windows 8.1
And Windows 10.
joe nacey
Posts: 11
Joined: Sun Jan 25, 2015 7:40 pm
ECU Model: No ECU

Re: s40 software

Post by joe nacey »

Hi thanks for your replys its on windows xp i did double click setup and the i followed all the instructions and said it was done.. do i need to do anything else with it just connect to my s40
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: s40 software

Post by Alex DTA »

You'll need to make sure your port settings are correct.
See here:
http://www.dtafast.com/Downloads/Manual ... ttings.pdf
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: s40 software

Post by Rob Stevens »

S40 needs to be powered from 12v also!
Post Reply