s40 software
s40 software
Hi i have a new s40 just wondering what software do i have to download onto my laptop in order to plug into it.. thanks
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: s40 software
You need the S series PC software
http://www.dtafast.co.uk/Downloads/PC_S ... Series.zip
http://www.dtafast.co.uk/Downloads/PC_S ... Series.zip
Re: s40 software
Ok i have downloaded it but i cant seem unzip it or open it...
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: s40 software
Oh, that's not a good start! If you double click on the downloaded file it should open up to 4 files, then double click on setup.exe and follow the instructions.
-
- Posts: 70
- Joined: Tue Jul 26, 2011 10:55 am
- ECU Model: S40 Pro
- Firmware Version: 79
- Location: The Netherlands
- Contact:
Re: s40 software
what Operating System do you use?
Here it's working on Windows XP, Windows 7 and Windows 8.1
Did download the same file for three weeks ago and did an update on all my systems without problem
Here it's working on Windows XP, Windows 7 and Windows 8.1
Did download the same file for three weeks ago and did an update on all my systems without problem
Vauxhall Corsa C20XE Powered by Eaton M90
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: s40 software
And Windows 10.corsaboy wrote:Here it's working on Windows XP, Windows 7 and Windows 8.1
Re: s40 software
Hi thanks for your replys its on windows xp i did double click setup and the i followed all the instructions and said it was done.. do i need to do anything else with it just connect to my s40
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: s40 software
You'll need to make sure your port settings are correct.
See here:
http://www.dtafast.com/Downloads/Manual ... ttings.pdf
See here:
http://www.dtafast.com/Downloads/Manual ... ttings.pdf
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: s40 software
S40 needs to be powered from 12v also!