Hello,
i have done an oscilloscope test, and i don't know if there are something wrong.
It's a xu10j4rs engine with jenvey itb's,cams, wasted spark coil and Dta S40 ecu.
Many thanks!!
oscilloscope test
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: oscilloscope test
Are you having problems or expecting something to be wrong ?
Re: oscilloscope test
Yes Stevieturbo, i have some misfires at iddle and low revs,that now it seems to be solved touching in the flywheel sensor, and i want to know if there are something wrong in the test.
All the other oscilloscope test that i have seen, show many spikes, so,how mine it's flat, i have a doubt
All the other oscilloscope test that i have seen, show many spikes, so,how mine it's flat, i have a doubt
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: oscilloscope test
It's flat because the engine is running and idling smoothly. Certainly from that snapshot everything looks fine.
The up/down traces you see are with the engine cranking and not starting, hence rpm rises and falls each time compression is seen then passed hence the traces go up/down
The up/down traces you see are with the engine cranking and not starting, hence rpm rises and falls each time compression is seen then passed hence the traces go up/down
Re: oscilloscope test
Ok. Many thanks!!! i'm more calm if you say that all looks fine