Help bmw e30. s60 wiring

Wiring best practices and loom building technique
Post Reply
Leedb
Posts: 7
Joined: Wed Feb 10, 2016 3:15 pm
ECU Model: S60 Pro

Help bmw e30. s60 wiring

Post by Leedb »

Can anyone tell me how to wire 6 injectors to a s60 and a single coil with distributor thanks
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Help bmw e30. s60 wiring

Post by Alex DTA »

Injectors go to injector outputs 1 through 6 in the firing order.
Distributor goes to ignition output 1.
Leedb
Posts: 7
Joined: Wed Feb 10, 2016 3:15 pm
ECU Model: S60 Pro

Re: Help bmw e30. s60 wiring

Post by Leedb »

My wiring diagram has only got one to four injectors
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Help bmw e30. s60 wiring

Post by Alex DTA »

Doh, skim reading.

You'll only use the first three injector outputs, and run grouped injection. Firing order is 153624, so you'll put injectors 1 and 6 on output 1, 5 and 2 on output 2, and 3 and 4 on output 3.
Leedb
Posts: 7
Joined: Wed Feb 10, 2016 3:15 pm
ECU Model: S60 Pro

Re: Help bmw e30. s60 wiring

Post by Leedb »

Thanks for ur help
Post Reply