looking to source some pins for a round multiplug to build a new loom for my Citroen ZX, to save making 13 solder joints to old wire!
not sure who makes the housings but here's a picture of the pin concerned (click for a larger image...)
Have had a look at VWP Polevolt and Simtek without any luck, any other suggestions?
here's a borrowed image of the connector type
finding pins for an o.e peugeot/citroen connector?
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: finding pins for an o.e peugeot/citroen connector?
Looks very similar to Econoseal, but you'd need to buy one to check
http://www.polevolt.co.uk/acatalog/Term ... sings.html
Or possibly some of the Sumitomo
http://www.polevolt.co.uk/acatalog/Sumi ... inals.html
http://www.polevolt.co.uk/acatalog/Term ... sings.html
Or possibly some of the Sumitomo
http://www.polevolt.co.uk/acatalog/Sumi ... inals.html
Re: finding pins for an o.e peugeot/citroen connector?
thanks, they look similar, but these plugs dont have male/female pins, both plugs use the same type.
I found the part numbers and prices on Servicebox Peugeot, theyre about 40p each, no guarantees they'll sell me any though but worth a try!
I found the part numbers and prices on Servicebox Peugeot, theyre about 40p each, no guarantees they'll sell me any though but worth a try!
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: finding pins for an o.e peugeot/citroen connector?
I think I'd rather make 13 solder joints and heatshrink rather than use a French connector!
Martin
Martin
Re: finding pins for an o.e peugeot/citroen connector?
I need to use the connector regardless Martin its where the engine loom connects to the car loom