S60 pro Seat Leon Supercopa

Wiring best practices and loom building technique
Post Reply
tastolo
Posts: 17
Joined: Wed Sep 14, 2016 7:37 pm
ECU Model: S60 Pro

S60 pro Seat Leon Supercopa

Post by tastolo »

DTA s60 SEAT Leon cupra Supercopa , someone has a scheme that I can be helpful, can go with the original coils? or I have to put other, I think put the accelerator cable
remoracing@yahoo.es thanks.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: S60 pro Seat Leon Supercopa

Post by Alex DTA »

You can use the original coils.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: S60 pro Seat Leon Supercopa

Post by Alex DTA »

If you want to keep drive by wire, you can use the STC.

If you require assistance, we have a couple of dealers in Spain that can help.
http://www.dtafast.co.uk/dealers/
tastolo
Posts: 17
Joined: Wed Sep 14, 2016 7:37 pm
ECU Model: S60 Pro

Re: S60 pro Seat Leon Supercopa

Post by tastolo »

thanks.
tastolo
Posts: 17
Joined: Wed Sep 14, 2016 7:37 pm
ECU Model: S60 Pro

Re: S60 pro Seat Leon Supercopa

Post by tastolo »

I have problems, the oscilloscope does not work, real-time data by dialing 250 rpm starting to drive, I have not spark in coils, I have 2 + 2 , the program will not let me change map
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: S60 pro Seat Leon Supercopa

Post by Alex DTA »

If the oscilloscope doesn't work, you have no crank or cam signal to the ECU. Check the wiring.

Until the ECU can synchronise, there will be no output. See this video:

[youtube][/youtube]
Post Reply