To twist, or not to twist....

Wiring best practices and loom building technique
Post Reply
VR6Turbo
Posts: 329
Joined: Wed Mar 17, 2010 9:24 am
ECU Model: S80 Pro
Firmware Version: 62

To twist, or not to twist....

Post by VR6Turbo »

I'm using a factory loom and reterminating the end of it with the S80 plugs.

The only new wires I'm adding are for air temp and MAP sensor as the standard engine doesn't run them. Do I need to twist them?
Basil
Posts: 36
Joined: Fri Sep 16, 2011 2:28 pm

Re: To twist, or not to twist....

Post by Basil »

No
VR6Turbo
Posts: 329
Joined: Wed Mar 17, 2010 9:24 am
ECU Model: S80 Pro
Firmware Version: 62

Re: To twist, or not to twist....

Post by VR6Turbo »

Thanks, that makes life a bit easier then.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: To twist, or not to twist....

Post by stevieturbo »

And you could mount the MAP sensor local to the ecu if it simplifies wiring.
Post Reply