Inserting new pins into connector.

Wiring best practices and loom building technique
Post Reply
Boardpaul
Posts: 39
Joined: Mon Jan 02, 2017 11:50 am
ECU Model: S40 Pro
Firmware Version: 60

Inserting new pins into connector.

Post by Boardpaul »

Hi guys,
I've seen a thread on this previously, but for the life of me cannot find it now.
I'm currently wiring up a VW beetle to run an S40 ecu. I have a look that is ignition only and need to convert it to FI.
Tried to get a new pin into the ecu connector tonight and it didn't want to go in.
Any tips?

Thanks
Paul
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Inserting new pins into connector.

Post by stevieturbo »

Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Inserting new pins into connector.

Post by Rob Stevens »

you need to remove the lock, the small white bits on the connector move sideways to unlock the housing.
Boardpaul
Posts: 39
Joined: Mon Jan 02, 2017 11:50 am
ECU Model: S40 Pro
Firmware Version: 60

Re: Inserting new pins into connector.

Post by Boardpaul »

Perfect! That solved the issue. It's the simple things!!
Thanks
Post Reply