Page 1 of 1

Inserting new pins into connector.

Posted: Tue Mar 21, 2017 4:59 pm
by Boardpaul
Hi guys,
I've seen a thread on this previously, but for the life of me cannot find it now.
I'm currently wiring up a VW beetle to run an S40 ecu. I have a look that is ignition only and need to convert it to FI.
Tried to get a new pin into the ecu connector tonight and it didn't want to go in.
Any tips?

Thanks
Paul

Re: Inserting new pins into connector.

Posted: Tue Mar 21, 2017 6:32 pm
by stevieturbo

Re: Inserting new pins into connector.

Posted: Wed Mar 22, 2017 6:51 am
by Rob Stevens
you need to remove the lock, the small white bits on the connector move sideways to unlock the housing.

Re: Inserting new pins into connector.

Posted: Wed Mar 22, 2017 3:14 pm
by Boardpaul
Perfect! That solved the issue. It's the simple things!!
Thanks