Wiring an S60 for Porsche 911 non sequential injection

Wiring best practices and loom building technique
Post Reply
andytat
Posts: 21
Joined: Tue Feb 12, 2019 4:08 pm
ECU Model: S80 Pro
Firmware Version: 80.11

Wiring an S60 for Porsche 911 non sequential injection

Post by andytat »

Hi Guys.

I'm fitting an S60 ECU to a Porsche 911 engine. It will run a
single coil with the stock distributor and have non sequential
injection. How do I wire the ECU for 6 injectors?

Many Thanks.

Andy
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Wiring an S60 for Porsche 911 non sequential injection

Post by Alex DTA »

Pair them up in firing order on the first 3 ECU outputs..
andytat
Posts: 21
Joined: Tue Feb 12, 2019 4:08 pm
ECU Model: S80 Pro
Firmware Version: 80.11

Re: Wiring an S60 for Porsche 911 non sequential injection

Post by andytat »

Got it, thanks Alex

Regards.

Andy
Post Reply