T2 Injector wiring.

Wiring best practices and loom building technique
Post Reply
Paul Hassell
Posts: 4
Joined: Tue Dec 06, 2022 1:21 pm
ECU Model: No ECU

T2 Injector wiring.

Post by Paul Hassell »

Evening all.
I Have just purchased a T2 ECU and I am just looking at the wiring diagram and pinout for the plug, why does it only show Pin 8 for Injector 1, and Pin 9 for Injector 2 but nothing for Injector 3 & 4?
Sorry if there is an obvious answer to this question.
Paul.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: T2 Injector wiring.

Post by stevieturbo »

How many injectors are you intending to run ?

Same as the base ecu before it, it is a batch fire only setup. You can wire all 4 injectors on a 4cyl engine to a single output. There isn't really any benefit to using more outputs.
Paul Hassell
Posts: 4
Joined: Tue Dec 06, 2022 1:21 pm
ECU Model: No ECU

Re: T2 Injector wiring.

Post by Paul Hassell »

That makes perfect sense now, it is for a 1.6 8v Vauxhall so only a basic 4 Injector system.
Post Reply