twin injetors

Wiring best practices and loom building technique
bugs
Posts: 4
Joined: Sat Aug 20, 2011 1:46 am
ECU Model: P8 Pro
Location: Guernsey

twin injetors

Post by bugs »

how do I wire on 4 cylinder non sequential S100
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: twin injetors

Post by Rob Stevens »

Inner bank wire to o/p 1-4
Outer bank wire to 6-10
bugs
Posts: 4
Joined: Sat Aug 20, 2011 1:46 am
ECU Model: P8 Pro
Location: Guernsey

Re: twin injetors

Post by bugs »

Rob Stevens wrote:Inner bank wire to o/p 1-4
Outer bank wire to 6-10
Cheers Rob ( Andy Bougourd )
bugs
Posts: 4
Joined: Sat Aug 20, 2011 1:46 am
ECU Model: P8 Pro
Location: Guernsey

Re: twin injetors

Post by bugs »

Rob Stevens wrote:Inner bank wire to o/p 1-4
Outer bank wire to 6-10
Cheers Rob ( Andy Bougourd )

can I use 1 and 2 for inner and 6 and 7 for outer 2 on each as I need 9 and 10 for gear change?
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: twin injetors

Post by Rob Stevens »

But that doesn't make sense as I'm sure I didn't make any wiring changes when I moved from s80 to s100 but it was few years ago.
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: twin injetors

Post by Rob Stevens »

Yes 2 per output is fine
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: twin injetors

Post by Alex DTA »

Rob Stevens wrote:Inner bank wire to o/p 1-4
Outer bank wire to 6-10
Not quite.

Inner injectors go to outputs 1-4
Outer injectors go to outputs 5-8. You can still blend these in then.

You can still use 9 and 10 for paddle shift.
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: twin injetors

Post by Rob Stevens »

Alex, I checked the s100 wiring diagram before responding to Andy and it clearly states 1-5 and 6-10
But as I mentioned I dont recall making any changes from s80 to s100 so something needs correcting
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: twin injetors

Post by Alex DTA »

Hi Rob

So it does. The diagram need updating then.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: twin injetors

Post by stevieturbo »

I was actually going to respond similar to Alex...but waited as was unsure.

I actually got the impression years ago that say if it was a 6 cyl car...it might be outputs 1-3, and then 4-6 for example.

for my V8, 1-4 then 5-8

And I'd guess 10cyl, 1-5, and 6-10 ?

ie, they actually moved with numbers of cylinders ? Although I think the P8 had fixed wiring ?

Or maybe I'm waffling.
Post Reply