Page 1 of 2
twin injetors
Posted: Mon Jul 08, 2019 5:11 am
by bugs
how do I wire on 4 cylinder non sequential S100
Re: twin injetors
Posted: Mon Jul 08, 2019 6:02 am
by Rob Stevens
Inner bank wire to o/p 1-4
Outer bank wire to 6-10
Re: twin injetors
Posted: Mon Jul 08, 2019 6:05 am
by bugs
Rob Stevens wrote:Inner bank wire to o/p 1-4
Outer bank wire to 6-10
Cheers Rob ( Andy Bougourd )
Re: twin injetors
Posted: Mon Jul 08, 2019 6:13 am
by bugs
Rob Stevens wrote:Inner bank wire to o/p 1-4
Outer bank wire to 6-10
Cheers Rob ( Andy Bougourd )
can I use 1 and 2 for inner and 6 and 7 for outer 2 on each as I need 9 and 10 for gear change?
Re: twin injetors
Posted: Mon Jul 08, 2019 7:54 am
by Rob Stevens
But that doesn't make sense as I'm sure I didn't make any wiring changes when I moved from s80 to s100 but it was few years ago.
Re: twin injetors
Posted: Mon Jul 08, 2019 7:55 am
by Rob Stevens
Yes 2 per output is fine
Re: twin injetors
Posted: Mon Jul 08, 2019 2:20 pm
by Alex DTA
Rob Stevens wrote:Inner bank wire to o/p 1-4
Outer bank wire to 6-10
Not quite.
Inner injectors go to outputs 1-4
Outer injectors go to outputs 5-8. You can still blend these in then.
You can still use 9 and 10 for paddle shift.
Re: twin injetors
Posted: Tue Jul 09, 2019 2:10 am
by Rob Stevens
Alex, I checked the s100 wiring diagram before responding to Andy and it clearly states 1-5 and 6-10
But as I mentioned I dont recall making any changes from s80 to s100 so something needs correcting
Re: twin injetors
Posted: Tue Jul 09, 2019 4:02 am
by Alex DTA
Hi Rob
So it does. The diagram need updating then.
Re: twin injetors
Posted: Tue Jul 09, 2019 11:40 am
by stevieturbo
I was actually going to respond similar to Alex...but waited as was unsure.
I actually got the impression years ago that say if it was a 6 cyl car...it might be outputs 1-3, and then 4-6 for example.
for my V8, 1-4 then 5-8
And I'd guess 10cyl, 1-5, and 6-10 ?
ie, they actually moved with numbers of cylinders ? Although I think the P8 had fixed wiring ?
Or maybe I'm waffling.