Wiring fuel pump relay s60 pro ecu hayabusa

Wiring best practices and loom building technique
Post Reply
gsxr2mil
Posts: 46
Joined: Wed Feb 14, 2018 8:05 am
ECU Model: S60 Pro
Distributor: creative custom racing Frank
Firmware Version: 79.06

Wiring fuel pump relay s60 pro ecu hayabusa

Post by gsxr2mil »

Ok I'm wiring the fuel pump on a relay etc from the ecu and just wanted to know if this was the rite way ....4 prong relay

30 from relay goes to fused 12volt positive battery
85 goes to pin ecu
86 goes to ground chassis
87 goes to positive side of fuel pump
And then I ground the other side of fuel pump wire to chassis??

Is that way correct?
Rob Stevens
Posts: 1150
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Wiring fuel pump relay s60 pro ecu hayabusa

Post by Rob Stevens »

30 12v
86 12v
87 to fuel pump other side of pump to ground
85 to ECU fuel pump pin
INDYabusa
Posts: 21
Joined: Thu Dec 14, 2017 4:40 pm
ECU Model: S100 Pro
Distributor: DTA UK
Firmware Version: 79
Location: France

Re: Wiring fuel pump relay s60 pro ecu hayabusa

Post by INDYabusa »

Hope a schematic will help
Power side:
30 12v with a fuse to battery
87 to fuel pump other side of pump to ground
Command side:
86 12v from a switched feed
85 to ECU fuel pump pin

All AUX output gives a ground when activated except AUX 5 that output a 12v signal
Attachments
63F03B18-5037-4CB4-8ED8-3EA07F934E61.jpeg
Westfield Megabusa 1300 (Hayabusa powered Seven style kitcat and soon with DTA S100 ecu)
gsxr2mil
Posts: 46
Joined: Wed Feb 14, 2018 8:05 am
ECU Model: S60 Pro
Distributor: creative custom racing Frank
Firmware Version: 79.06

Re: Wiring fuel pump relay s60 pro ecu hayabusa

Post by gsxr2mil »

Thanks guys got it wired up correctly now
Post Reply