relay question

Wiring best practices and loom building technique
iceman_n
Posts: 141
Joined: Mon Jan 16, 2012 1:39 pm
ECU Model: S40 Pro
Firmware Version: 58

Re: relay question

Post by iceman_n »

Rob Stevens wrote:I cant make out what you are trying to show there just put a momentary 12v onto the lead to the starter, so long as it can pass 5A should be fine
yes thats the easy way, i thought to do it with a relay and not just a momentarey onto the starter lead...i wouldnt like the idea of voltage passing the momentary button

so i thought to control with momentary the low side of the relay and energize it via ground activation/cut through the momentary
Post Reply