dta s60 y32se vauxhall

Wiring best practices and loom building technique
Post Reply
hobbie bop
Posts: 4
Joined: Thu Jan 19, 2012 2:34 pm
ECU Model: S60 Pro

dta s60 y32se vauxhall

Post by hobbie bop »

hello i'm ronnie,coming from holland..
i have a vauxhall nova with a 3.2 v6 in it..

we have bought a dta s60 and we don't understand de wires for the injectors.
the firing seqeunse is 1.2.3.4.5.6. must we conect the injectors in the same line as the firing seqeunse.?

and have anyone a starting map for it..?

thanks for the informationthat we received..

my english is very good by the why.. ;)
Roverdose
Posts: 318
Joined: Tue Aug 09, 2011 2:54 pm
ECU Model: S80 Pro
Distributor: Roverdose
Location: Stevenage
Contact:

Re: dta s60 y32se vauxhall

Post by Roverdose »

yes, wire the injectors in the sequence, 1-1, 2-2 etc etc.

same with the ignition coils.

Drew
User avatar
ignitionautosport
Posts: 577
Joined: Wed Jul 27, 2011 5:30 am
ECU Model: S80 Pro
Location: New Zealand
Contact:

Re: dta s60 y32se vauxhall

Post by ignitionautosport »

Except an S60 only has 4 drivers?
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
Roverdose
Posts: 318
Joined: Tue Aug 09, 2011 2:54 pm
ECU Model: S80 Pro
Distributor: Roverdose
Location: Stevenage
Contact:

Re: dta s60 y32se vauxhall

Post by Roverdose »

lol didnt read that properly then!

connect injector 1/4 to dta inj 1
2/5 to dta inj 2
3/6 to dta inj 3

Drew
hobbie bop
Posts: 4
Joined: Thu Jan 19, 2012 2:34 pm
ECU Model: S60 Pro

Re: dta s60 y32se vauxhall

Post by hobbie bop »

thanks for the response..;)
it's really appreciated..
hobbie bop
Posts: 4
Joined: Thu Jan 19, 2012 2:34 pm
ECU Model: S60 Pro

Re: dta s60 y32se vauxhall

Post by hobbie bop »

on which map can we try the car.?
we need a little bit live so we can bring the car to a tuner..

thanks.
Roverdose
Posts: 318
Joined: Tue Aug 09, 2011 2:54 pm
ECU Model: S80 Pro
Distributor: Roverdose
Location: Stevenage
Contact:

Re: dta s60 y32se vauxhall

Post by Roverdose »

trailer it.

wouldn't try and drive a car on a map you downloaded from the net, no matter how close the engine specs are you your own engine.

if you want to try and start it to make sure its working then take a look through the manual about crank oscilloscope and load one of dta's test maps for a 6 cylinder.

Drew
Last edited by Roverdose on Sun Jan 22, 2012 4:42 am, edited 1 time in total.
hobbie bop
Posts: 4
Joined: Thu Jan 19, 2012 2:34 pm
ECU Model: S60 Pro

Re: dta s60 y32se vauxhall

Post by hobbie bop »

we want to try it before we bring it to a tuner,because a tuner cost money and everything we do before is better for the wallet ;)..

thanks for the response roverdose..

we have already tried it,everything works..
Roverdose
Posts: 318
Joined: Tue Aug 09, 2011 2:54 pm
ECU Model: S80 Pro
Distributor: Roverdose
Location: Stevenage
Contact:

Re: dta s60 y32se vauxhall

Post by Roverdose »

if you have fuel and ignition then there isnt much more you need to do to get it running.

if running then tweeking and building the lower part of the map can be done at home relativly easily. good idle hot and cold and cold start take time.

Drew
Post Reply