Hello,
I want to ask of anyone has some information how you built your loom for a dta s80 on a bmw s54 m3 engine.
When you use wasted spark do you stil connect all 6 coils seperately?
Greatings Emil
Bmw s54 wiring
Bmw s54 wiring
Check our BMW E36 M3 S54 rally project here: http://www.facebook.com/pages/De-Bruin- ... 7483311630
Re: Bmw s54 wiring
Yes.
Then in the software switch off one coil per cylinder and switch on twin spark it will work
Then in the software switch off one coil per cylinder and switch on twin spark it will work
-
- Posts: 3577
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Bmw s54 wiring
And connect coils in firing order to outputs 1-6 as per wiring diagram.
Re: Bmw s54 wiring
Okey so just connect one coil on one position on the dta?
Just like the wiring diagram?
Just like the wiring diagram?
Check our BMW E36 M3 S54 rally project here: http://www.facebook.com/pages/De-Bruin- ... 7483311630
-
- Posts: 3577
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Bmw s54 wiring
Correct. And enable "twin spark" in general engine settings, with zero offset.Emil wrote:Okey so just connect one coil on one position on the dta?
Just like the wiring diagram?
it will fire DTA output 1+3 together, 2+4 together and 3+6 together, just the same as wasted spark.
Re: Bmw s54 wiring
Great!
I wanted to know for sure!
Tnxs for the advice!
I wanted to know for sure!
Tnxs for the advice!
Check our BMW E36 M3 S54 rally project here: http://www.facebook.com/pages/De-Bruin- ... 7483311630
Re: Bmw s54 wiring
Hello,
Is IT The Same with the injectors?
When you dont use sequentiel injection
Do you stil connect every singel injector to a singel connector on the s80?
So with a firing order 153624
Inj1 pos 9 s80
Inj2 pos 16 s80
Inj3 pos 33 s80
Inj4 pos 15 s80
Inj5 pos 17 s80
Inj6 pos 25 s80
Greatings Emil
Is IT The Same with the injectors?
When you dont use sequentiel injection
Do you stil connect every singel injector to a singel connector on the s80?
So with a firing order 153624
Inj1 pos 9 s80
Inj2 pos 16 s80
Inj3 pos 33 s80
Inj4 pos 15 s80
Inj5 pos 17 s80
Inj6 pos 25 s80
Greatings Emil
Check our BMW E36 M3 S54 rally project here: http://www.facebook.com/pages/De-Bruin- ... 7483311630
-
- Posts: 1247
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Bmw s54 wiring
yes, but just make sure you get the firing order right in case you wish to move to sequential in the future, otherwise it doesn't matter.
-
- Posts: 3577
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Bmw s54 wiring
Correct.
-
- Posts: 2
- Joined: Sat Aug 09, 2014 5:46 am
- ECU Model: S60 Pro
Re: Bmw s54 wiring
Hello
We have S60 PRO ECU with custom wiring loom for BMW S54.
We need wasted cop firing order can you guide us for coil wiring connection.
usually 6cyl. engine with wasted cop ignition used the below connection in any ecu.
1&6 to coil 1
2&5 to coil 2
3&4 to coil 3
Is the above information is true?
thank you
We have S60 PRO ECU with custom wiring loom for BMW S54.
We need wasted cop firing order can you guide us for coil wiring connection.
usually 6cyl. engine with wasted cop ignition used the below connection in any ecu.
1&6 to coil 1
2&5 to coil 2
3&4 to coil 3
Is the above information is true?
thank you