Need a bit of advice......
Im fitting the Dta S240 to my 206, and will need to run the standard Peugeot ecu to control the dash etc.... but will need the crank signal to both ecu's.
I know you can buy a plug from Omex to make this work with the Omex system.
Whats the best way to make this work with the S40?
Thanks
Crank Sensor Split Sensor/Signal
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Crank Sensor Split Sensor/Signal
You just wire it in yourself I presume ?