Crank Sensor Split Sensor/Signal

Wiring best practices and loom building technique
Post Reply
DYL4N
Posts: 1
Joined: Fri Nov 08, 2013 11:39 am
ECU Model: S40 Pro

Crank Sensor Split Sensor/Signal

Post by DYL4N »

Need a bit of advice...... :roll:

Im fitting the Dta S240 to my 206, and will need to run the standard Peugeot ecu to control the dash etc.... but will need the crank signal to both ecu's.

I know you can buy a plug from Omex to make this work with the Omex system.

Whats the best way to make this work with the S40?

Thanks
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Crank Sensor Split Sensor/Signal

Post by stevieturbo »

You just wire it in yourself I presume ?
Post Reply