jag v6 wiring loom

Wiring best practices and loom building technique
Post Reply
hotrodbob
Posts: 1
Joined: Sun Aug 09, 2015 2:55 pm
ECU Model: S80 Pro

jag v6 wiring loom

Post by hotrodbob »

Hi all iam new to the site so sorry if ive posted in the wrong section

iam slowly building a Luego Vento kit car and I have fitted the engine from a jaguar Stype it is a 3.0V6 ( AJ-V6 ) iam going to use the Dta S80 Pro ecu but can not yet afford one so wile I save up for the ecu iam going to tackle the engine loom
I kept the stock loom from the jag when I stripped the car I have stripped the loom down completely and un pined it from the jag ecu plug so i was wondering has any one all ready used this engine /ecu combo and is there any pin data for this engine /ecu combo so I can wire up the S80 Pro plugs wile I save up for the ecu
thaks jim
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: jag v6 wiring loom

Post by Rob Stevens »

Post Reply