As Rob says, Lambda Target is not turned on in the logging options in the log.
Also, you have a 120 second delay from start for closed loop, but neither of the logs are for that long. Try running the car for more than 2 minutes.
Target lambda not logging correctly?
Re: Target lambda not logging correctly?
Lambda target is turned on in the logging in the car, I just didn't have the very latest map on me without going out to the car. Lesson learned there.
But I think you're right on the 2 minute thing, will give it another go tonight.
While we're here, would it be possible to add another data stream option to the rs232 output? RC2 output for racechrono.
But I think you're right on the 2 minute thing, will give it another go tonight.
While we're here, would it be possible to add another data stream option to the rs232 output? RC2 output for racechrono.
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Target lambda not logging correctly?
I'll add the RC2 output to the very long enhancements list.