DTA s60 SEAT Leon cupra Supercopa , someone has a scheme that I can be helpful, can go with the original coils? or I have to put other, I think put the accelerator cable
remoracing@yahoo.es thanks.
S60 pro Seat Leon Supercopa
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: S60 pro Seat Leon Supercopa
You can use the original coils.
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: S60 pro Seat Leon Supercopa
If you want to keep drive by wire, you can use the STC.
If you require assistance, we have a couple of dealers in Spain that can help.
http://www.dtafast.co.uk/dealers/
If you require assistance, we have a couple of dealers in Spain that can help.
http://www.dtafast.co.uk/dealers/
Re: S60 pro Seat Leon Supercopa
thanks.
Re: S60 pro Seat Leon Supercopa
I have problems, the oscilloscope does not work, real-time data by dialing 250 rpm starting to drive, I have not spark in coils, I have 2 + 2 , the program will not let me change map
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: S60 pro Seat Leon Supercopa
If the oscilloscope doesn't work, you have no crank or cam signal to the ECU. Check the wiring.
Until the ECU can synchronise, there will be no output. See this video:
[youtube][/youtube]
Until the ECU can synchronise, there will be no output. See this video:
[youtube][/youtube]