DTA P8 pro mapping problem

Give input on tuning as well as any tips and tricks you may have. Also feel free to share base mapping files for various engine types.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: DTA P8 pro mapping problem

Post by stevieturbo »

Rob Stevens wrote:Silly question but have you unlocked the map?
True...and also pressing F4 to save any changes ?
ThanosOptionGarage
Posts: 7
Joined: Tue Feb 14, 2017 2:30 am
ECU Model: S60 Pro
Distributor: plex tuning
Firmware Version: 62.02

Re: DTA P8 pro mapping problem

Post by ThanosOptionGarage »

yes i did all the proper steps as the manual say.but still is not a silly question
ThanosOptionGarage
Posts: 7
Joined: Tue Feb 14, 2017 2:30 am
ECU Model: S60 Pro
Distributor: plex tuning
Firmware Version: 62.02

Re: DTA P8 pro mapping problem

Post by ThanosOptionGarage »

yes Stevie i always tried using the f4 button but nothing happend
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: DTA P8 pro mapping problem

Post by stevieturbo »

So have you ever communicated correctly with this P8 before..or indeed any P8 before with the same computer/cable setup ?
ThanosOptionGarage
Posts: 7
Joined: Tue Feb 14, 2017 2:30 am
ECU Model: S60 Pro
Distributor: plex tuning
Firmware Version: 62.02

Re: DTA P8 pro mapping problem

Post by ThanosOptionGarage »

in the past i didn't have a problem to connect to any DTA ecus until this very moment with this P8 model,always with the same cable and only
Post Reply