Coil1 - 1 and 6 cylinder
Coil2 - 3 and 5 cylinder
Coil3 - 4 and 7 cylinder
Coil4 - 2 and 8 cylinder
Question with pretty much every sensor...
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Question with pretty much every sensor...
My mistake...
Coil1 - 1 and 6 cylinder
Coil2 - 3 and 5 cylinder
Coil3 - 4 and 7 cylinder
Coil4 - 2 and 8 cylinder
That would fire 12341234 as it should be according to manual...
That means...
Coil1 - firing 1 and 6 cylinder - bang in 1
Coil2 - firing 3 and 5 cylinder - bang in 5
Coil3 - firing 4 and 7 cylinder - bang in 4
Coil4 - firing 2 and 8 cylinder - bang in 8
Coil1 - firing 1 and 6 cylinder - bang in 6
Coil2 - firing 3 and 5 cylinder - bang in 3
Coil3 - firing 4 and 7 cylinder - bang in 7
Coil4 - firing 2 and 8 cylinder - bang in 2
That would satisfy firing order 15486372 but that still remains a misyery if it is that simple to adjust firing coils 1234 and instead of 5678 firing once more 1234...
Coil1 - 1 and 6 cylinder
Coil2 - 3 and 5 cylinder
Coil3 - 4 and 7 cylinder
Coil4 - 2 and 8 cylinder
That would fire 12341234 as it should be according to manual...
That means...
Coil1 - firing 1 and 6 cylinder - bang in 1
Coil2 - firing 3 and 5 cylinder - bang in 5
Coil3 - firing 4 and 7 cylinder - bang in 4
Coil4 - firing 2 and 8 cylinder - bang in 8
Coil1 - firing 1 and 6 cylinder - bang in 6
Coil2 - firing 3 and 5 cylinder - bang in 3
Coil3 - firing 4 and 7 cylinder - bang in 7
Coil4 - firing 2 and 8 cylinder - bang in 2
That would satisfy firing order 15486372 but that still remains a misyery if it is that simple to adjust firing coils 1234 and instead of 5678 firing once more 1234...
Re: Question with pretty much every sensor...
What type of pin is for dta connector cause I did not get some with ecu cause i bought used...
What to search for? Any code or something? Both connectors are ok
What to search for? Any code or something? Both connectors are ok
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Question with pretty much every sensor...
Firing order is 15486372
Coil output 1 = 1/6
Coil output 2 = 5/3
Coil output 3 = 4/7
Coil output 4 = 8/2
Now depending exactly what coils you are using...if you had one coil per cylinder you could carry on and use all 8 outputs then select twin spark in the software.
But I think you suggested yours is 1 coil per pair of cylinders ? but only 1 trigger wire per coil ?
Coil output 1 = 1/6
Coil output 2 = 5/3
Coil output 3 = 4/7
Coil output 4 = 8/2
Now depending exactly what coils you are using...if you had one coil per cylinder you could carry on and use all 8 outputs then select twin spark in the software.
But I think you suggested yours is 1 coil per pair of cylinders ? but only 1 trigger wire per coil ?
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Question with pretty much every sensor...
ECU connectors are listed in the manual I think.
But same as Link, Motec, Haltech etc etc
Martin at MEF Motorsport can supply, or indeed Alex at DTA.
But same as Link, Motec, Haltech etc etc
Martin at MEF Motorsport can supply, or indeed Alex at DTA.
Re: Question with pretty much every sensor...
or RS Components
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Question with pretty much every sensor...
http://www.dtafast.co.uk/dta_products/s ... connector/
Or for pins, you can google RS/Farnell etc etc with the part number
http://www.corsa-technic.com/item.php?i ... ory_id=108
Or for pins, you can google RS/Farnell etc etc with the part number
http://www.corsa-technic.com/item.php?i ... ory_id=108