S60/80/100 housing/mounting bracket
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
S60/80/100 housing/mounting bracket
Here is my latest offering, I finally got around to designing a mounting bracket/housing that will accommodate the S60 or S80/100 ecus!
The ecu is a nice snug friction fit inside the ABS 3D printed housing and it has 4 x M6 clearance mounting lugs.
Price will be £49.50 plus £3.50 P&P, Payment by Paypal
available direct from mefmotorsport
email mefmotorsport@btinternet.com
07837 721986
The ecu is a nice snug friction fit inside the ABS 3D printed housing and it has 4 x M6 clearance mounting lugs.
Price will be £49.50 plus £3.50 P&P, Payment by Paypal
available direct from mefmotorsport
email mefmotorsport@btinternet.com
07837 721986
- ignitionautosport
- Posts: 577
- Joined: Wed Jul 27, 2011 5:30 am
- ECU Model: S80 Pro
- Location: New Zealand
- Contact:
Re: S60/80/100 housing/mounting bracket
Very nice.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
Re: S60/80/100 housing/mounting bracket
That's a nice solution.
Is there one to fit the older (long) s100 ecu's?
Is there one to fit the older (long) s100 ecu's?
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: S60/80/100 housing/mounting bracket
You could use the same housing and have the longer early S100 protruding from each end. I cant remember what the length was of the early one but the current S80/S100 protrudes around 6mm from each end of this housing. The S60 is around 10mm shorter than this housing as you can see in the picture.gnutz2 wrote:That's a nice solution.
Is there one to fit the older (long) s100 ecu's?
Its not really worthwhile me making a longer version since there arn't so many early S100's in use.
Martin
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: S60/80/100 housing/mounting bracket
Take a grinder to the big casing to make it smaller ? lol
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: S60/80/100 housing/mounting bracket
I think you might hit problems fitting the pcb then!stevieturbo wrote:Take a grinder to the big casing to make it smaller ? lol
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: S60/80/100 housing/mounting bracket
I'm sure the grinder would go through that too lol
Might get some queries about why it doesnt work anymore though
Might get some queries about why it doesnt work anymore though
-
- Posts: 177
- Joined: Tue May 13, 2014 5:30 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
Re: S60/80/100 housing/mounting bracket
Ah, you just need a jar of lucas magic smoke to blow back down the traces.
Re: S60/80/100 housing/mounting bracket
Is there anything coming for the S40?
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: S60/80/100 housing/mounting bracket
Yes, after popular demand I have designed one for the S40 now, should be available in a week or so, price will be the same though.e21-mark wrote:Is there anything coming for the S40?
martin