Hi,
I have a Laptop with Win7 64bit and the DTA Swin V79.02 runs perfekt.
Now I have a Pc at my Engine testbench with Win7 32 bit and the DTA Swin V79.02 and V80.07 and the software does not work very well.
The Windows 7 32bit has been reinstalled.
When I start the DTA software, left below in red "Click Here to Unlock Map" and click to unlock the Map, a error message appears. "Map not transferred succesfully, Please Try Again"
Sometimes mistakes appear in the visualization and the software crashes.
Regards Stefan
DTA Swin problem at my PC
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: DTA Swin problem at my PC
Almost all comms issues etc relate to the USB-serial adaptor, or whatever adaptor you are using.
Can you try another or a direct serial connection ?
Can you try another or a direct serial connection ?
-
- Posts: 21
- Joined: Tue May 13, 2014 4:47 am
- ECU Model: S80 Pro
- Firmware Version: 73
- Location: Germany
Re: DTA Swin problem at my PC
Hi,
I can try to use another adapter, the PC hasen't a serial input.
For the laptop, I used the same adapter as the PC. .
Regards Stefan
I can try to use another adapter, the PC hasen't a serial input.
For the laptop, I used the same adapter as the PC. .
Regards Stefan
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: DTA Swin problem at my PC
Use this document to check the driver version, and update it if necessary:
http://www.dtafast.co.uk/download_files ... Update.pdf
http://www.dtafast.co.uk/download_files ... Update.pdf
-
- Posts: 21
- Joined: Tue May 13, 2014 4:47 am
- ECU Model: S80 Pro
- Firmware Version: 73
- Location: Germany
Re: DTA Swin problem at my PC
Hello,
I have tried all tips, but the problem persists
Regards Stefan
I have tried all tips, but the problem persists
Regards Stefan
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: DTA Swin problem at my PC
IMO find a computer with a serial port, that will allow you to rule out an ecu problem.
But it is most likely the adaptor.
Have you ever communicated correctly with any DTA ecu with the setup you are using ? Or is it just this one ?
But it is most likely the adaptor.
Have you ever communicated correctly with any DTA ecu with the setup you are using ? Or is it just this one ?
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: DTA Swin problem at my PC
If you want me to look at your PC with TeamViewer, send an email.
-
- Posts: 21
- Joined: Tue May 13, 2014 4:47 am
- ECU Model: S80 Pro
- Firmware Version: 73
- Location: Germany
Re: DTA Swin problem at my PC
Hi,
Today, since march trying to solve the connection problem. I have found the problem, I have tried 3 different serial adapters and one of it works perfectly now.
Regards
Stefan
Today, since march trying to solve the connection problem. I have found the problem, I have tried 3 different serial adapters and one of it works perfectly now.
Regards
Stefan