Hi all,
I have an issue with an S60 v61 using the latest DTA SWIN Software running Under win XP with a Serial Port no USB converters.
I can read the MAP in the ECU but when I try to update a Settings (shift cut) it shows me the MAP NOT TRANSFERRED SUCCESSFULLY.
after many attempts I was able to change the settings but it is a nightmare.
everything works well with an other S60 V73 so I assume it might be a compatibility issue with new dta SWIN and old Firmware.
I do not want to risk anything updating the ECU firmware so can someone send me an old version of DTA SWIN to give it a try.
Thanks
OLD S60 Communication issues
-
- Posts: 3587
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: OLD S60 Communication issues
What version would you prefer ? and email address ?
I have most right back as far as 60.02 software.
Although I dont think there should be any major risks upgrading.
But safer to try the older software first, and maybe flash upgrade in smaller steps if it does work.
I have most right back as far as 60.02 software.
Although I dont think there should be any major risks upgrading.
But safer to try the older software first, and maybe flash upgrade in smaller steps if it does work.
-
- Posts: 3587
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: OLD S60 Communication issues
I've sent 2 emails, with versions 61.02 to 68.0 ( not all inclusive, just 4 versions )
-
- Posts: 24
- Joined: Tue Sep 20, 2016 4:47 am
- ECU Model: S60 Pro
- Distributor: xap
- Firmware Version: 61
- Location: Ardeche, France
Re: OLD S60 Communication issues
Thanks Again Stevie the V63 worked like a charm !!!!
-
- Posts: 3587
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: OLD S60 Communication issues
Good job !