Fiat Punto S1600 Reblica on S80

Document your project with images, pictures, etc., and share with others.
Post Reply
moserrene
Posts: 6
Joined: Thu Nov 19, 2015 10:01 am
ECU Model: S80 Pro
Location: Austria
Contact:

Fiat Punto S1600 Reblica on S80

Post by moserrene »

HI

her´s my punto S1600 reblica with 2.0 16V engine on DTA S80

body mods

front and rear suspension custom built
all body parts fibreglas
sassa roll cage

engine spec

CR 12,7:1
cams 302° 13mm lift
spring, retainers and so on....
light crank
light rods
custom built manifold and exhaust

engine runs now i must finish the fuel system, than i can start the real time mapping on the dyno
Attachments
steht vorn.jpg
frei.jpg
steht.jpg
HeikoGolfMK1
Posts: 3
Joined: Tue Dec 26, 2023 8:30 am
ECU Model: S60 Pro
Distributor: Alons Motorsport

Re: Fiat Punto S1600 Reblica on S80

Post by HeikoGolfMK1 »

Hellö,

nice projekt :-)
KostasHGT
Posts: 14
Joined: Thu Oct 13, 2016 4:49 pm
ECU Model: S60 Pro
Firmware Version: 40

Re: Fiat Punto S1600 Reblica on S80

Post by KostasHGT »

Hi, so it's S2000 then as i say for my also 2000CC punto mk2
Post Reply