Trying to run S40 on twin injectors

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: Trying to run S40 on twin injectors

Post by mefmotorsport »

Glad to see you've now got it sorted.
Andrew
Posts: 5
Joined: Fri Jun 30, 2017 3:01 pm
ECU Model: S40 Pro
Firmware Version: 81.02

Re: Trying to run S40 on twin injectors

Post by Andrew »

Thanks for the help Martin, kinda back to the drawing board though and going to fit jenveys, if it wasn't for the fact I have a 310deg cam then the bike bodies may have worked well for me but I just can't get over the butterflies angle and what come with the steep angle I throught it wouldn't be a issue but I was wrong. I think the twin injector is the way though it was showing more power and torque only a few up tho but think it really needs smaller primary and the secondary the size I have and further up the inlet tract in stead of matching sized.
Post Reply