ALS/Turbo funcion
ALS/Turbo funcion
Is it normal that if Turbo function is on , engine stalls as soon ALS button is pressed
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: ALS/Turbo funcion
No, it usually means the ALS/MAP2 functions haven't been set properly.
Check all the map 2 values.
Check all the map 2 values.
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: ALS/Turbo funcion
Have you actually got the fuel and ignition maps filled in? like Alex suggests.
Re: ALS/Turbo funcion
Yes Of course copy of main maps to test
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: ALS/Turbo funcion
Ok, so I need to try and drag the rest of the info out then
You have valve fitted?
If so I suspect that the engine is going masivally weak as soon as you activate and stalling?
Try setting the minimum rpm to 2000 or something and changing the always active check box. Also change the ALS time to 10 sec or something
You have valve fitted?
If so I suspect that the engine is going masivally weak as soon as you activate and stalling?
Try setting the minimum rpm to 2000 or something and changing the always active check box. Also change the ALS time to 10 sec or something
Re: ALS/Turbo funcion
No valve, it stalls as if you turn off ignition.I saw this on an other ecu too.If Turbo function turned off ALS works perfect.
I need Turbo Function only of the over boost limit
I need Turbo Function only of the over boost limit
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: ALS/Turbo funcion
Email me a copy of the map, and I'll test it next week.
Re: ALS/Turbo funcion
I will try to send you a map no problem,I have maps on other PC at work
Thanks
Thanks