NT Dash page buttons

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
PhillipM
Posts: 177
Joined: Tue May 13, 2014 5:30 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73

NT Dash page buttons

Post by PhillipM »

Quick one, as above, are the buttons for changing pages on the NT Dash just wired to the digital 1 & 2 inputs? Can't see anything in the docs.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: NT Dash page buttons

Post by Alex DTA »

Just digital 1, other side of switch to sensor ground
PhillipM
Posts: 177
Joined: Tue May 13, 2014 5:30 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73

Re: NT Dash page buttons

Post by PhillipM »

Ah right, just the single switch on these then? thanks Alex.
Huxley
Posts: 39
Joined: Sat May 10, 2014 7:37 am
ECU Model: S60 Pro

Re: NT Dash page buttons

Post by Huxley »

Just a follow on on this one when it comes up with an alarm how do you accept the alarm ie OK ?
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: NT Dash page buttons

Post by Alex DTA »

At the moment it's on permanently.
There's an update coming soon that will allow them to be dismissed, but I don't have an ETA on that.
Huxley
Posts: 39
Joined: Sat May 10, 2014 7:37 am
ECU Model: S60 Pro

Re: NT Dash page buttons

Post by Huxley »

Ok cheers Alex i’ll wire for it will there be a chance of an up and down screen too ?
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: NT Dash page buttons

Post by Alex DTA »

You can do that already.
In Dash Editor Options, you can choose what triggers the page up and page down command.
This can be the physical buttons, or you can also use a CAN switch if you want.
Huxley
Posts: 39
Joined: Sat May 10, 2014 7:37 am
ECU Model: S60 Pro

Re: NT Dash page buttons

Post by Huxley »

Thanks Alex
Post Reply