Beta Software

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Beta Software

Post by stevieturbo »

I have it set to medium, 125%...

Any smaller and I'll need binoculars ! lol It's staying there.

Never really understood why when you bump up screen resolution, they have to make everything smaller !
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Beta Software

Post by Alex DTA »

I'm not suggesting changing it permanently, just so that you can see the software working.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Beta Software

Post by stevieturbo »

It's settings like that I hate changing at all though, especially resolution too.

Because every time I do, it messes up my entire desktop and I have to re-organise it all. 1st world problems !

Not sure what way my laptop is configured....but have a feeling I've it the same way
Shedley
Posts: 12
Joined: Fri Dec 15, 2017 3:53 pm
ECU Model: No ECU

Re: Beta Software

Post by Shedley »

Any updates on this ?
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Beta Software

Post by Alex DTA »

Working on the real time mapping, and also have completed another round of testing, which has highlighted a couple of bugs.
I haven't fixed them yet, but that's this week's task, to get another beta out (no real time mapping though).
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Beta Software

Post by Alex DTA »

85.09 has been released.
This is now stable, and we've been using it on ECUs with no issues.
As always, back up any maps with the old software first.

I'm currently working on the Real Time Mapping. Next month is looking optimistic, but we'll keep working as hard as we can.
onslack
Posts: 39
Joined: Wed Nov 19, 2014 7:17 am
ECU Model: S60 Pro

Re: Beta Software

Post by onslack »

Cheers Alex, I'll update my software this evening :D
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Beta Software

Post by Alex DTA »

Anyone found anything to report yet?
Anders_Karlsson
Posts: 116
Joined: Sat Jul 21, 2012 6:13 am
ECU Model: S80 Pro
Firmware Version: 66
Location: Sweden

Re: Beta Software

Post by Anders_Karlsson »

I have some issues with the screen resolution, screenshot below is an example.
DTASwinV85_09_ignore_DPI_scaling_setting.PNG
I have changed the settings for the program, checked the "disregard high DPI-scaling".
If i uncheck that setting the text is in the right place but everything gets "fuzzy".
Like stevieturbo i dont want to change any settings every time i open the program.

V80.07 looks like this with the same settings as above.
DTASwinV80_07_ignore_high_DPI_scaling.PNG
Apart from that the new software looks very nice, i like the graphs with colours a lot.
Much easier to smooth out the start fuelling map for instance.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Beta Software

Post by Alex DTA »

Thanks Anders.
As above, the fix is simple, but I do understand it not being suitable for everyone.
I'm going to concentrate on getting the real time mapping done first, then I'll investigate to see if there's a simple solution to fix this problem on W7.
Post Reply