Hi all
I used to run an e48 and was able to drive the VDO tach in my Caterham direct from the tach out on my e48. I have now updated to an s60 and wondered whether the tach out will still drive my tach or whether i will need to run a gutted relay to get it to drive the gauge?
Just at the loom planning stage and for neatness would like to incorporate the drive relay in the loom if i need it.
Ian
VDO tach
-
- Posts: 35
- Joined: Wed Feb 22, 2012 3:50 am
- ECU Model: No ECU
- Firmware Version: 31
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: VDO tach
Output from the S60 is the same as the E48.
-
- Posts: 35
- Joined: Wed Feb 22, 2012 3:50 am
- ECU Model: No ECU
- Firmware Version: 31
Re: VDO tach
Thanks Alex
That's item 1 on the list check off
That's item 1 on the list check off