Hi
Building 2jz 12 injectors S80 ecu
Previous running fully sequential cop ,6 injector but need to add another 6 injectors to run Methanol and high boost
Is it possible to run 6 primary sequential and 6 secondary's in batch?
Does different size primary and secondary injectors good or should be all 12 the same size
Injector wiring
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Injector wiring
You can't run primary sequential, and secondary batch.
Your options are both batch, and then you can blend in the secondary set, or you can run sequential, but with two injectors working all the time.
Injector size doesn't matter for either option.
Your options are both batch, and then you can blend in the secondary set, or you can run sequential, but with two injectors working all the time.
Injector size doesn't matter for either option.
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Injector wiring
Semi-sequential is what I mean, two injectors per output.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Injector wiring
As you're running methanol.....it probably needs a lot of fuel anyway. So if you want to retain full sequential, you could just fire 2 inj per cylinder all the time
The outputs should be fine with 2 injectors wired to them?
The outputs should be fine with 2 injectors wired to them?
Re: Injector wiring
I don't think will be able to idle with 2 x 5000cc
Re: Injector wiring
I hope you mean 500 cc injectors ! And why not ? Some of our turbo bikes are using 1200 cc single injectors x 4 and idle finerocar wrote:I don't think will be able to idle with 2 x 5000cc
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Injector wiring
I run 1000cc on petrol, and mine idles fine.
Single 1000cc injectors on methanol will not be a problem on a 6 cylinder.
Alternatively 2 injectors per output will be fine. You can run up to 4 if you really want to.
Single 1000cc injectors on methanol will not be a problem on a 6 cylinder.
Alternatively 2 injectors per output will be fine. You can run up to 4 if you really want to.
Re: Injector wiring
No 5000cc per injector 10000cc per cylinder
Billet Atomizers 3 500pph x 12
Used x6 Siemens 2300 cc for VP import before
Billet Atomizers 3 500pph x 12
Used x6 Siemens 2300 cc for VP import before
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Injector wiring
Are you aiming for around 5000hp?
Please tell me you have some pictures of this?
Please tell me you have some pictures of this?