Canbus signal
Canbus signal
Question can I have the launch control acctivated via a can signal from my Msport style steering wheel buttons via the can from my power management unit can board on a S100pro
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Canbus signal
I would say that's a pretty solid no.
Unless that CAN signal goes to a controller which can open/close a set of contacts or send an earth to the ecu.
But the ecu needs that physical switch.
Unless that CAN signal goes to a controller which can open/close a set of contacts or send an earth to the ecu.
But the ecu needs that physical switch.
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Canbus signal
As stevieturbo says, that's not possible at the moment.
Re: Canbus signal
Cheers guys