Hi
After I changed the serie data output settings acording to the getting started guide on dtadroid.com I cant unlock the map on dtaswin.
When i type inn my pin code and try to unlock the map I get the message "failed to unlock map. Try again."
When i cross it out i get a error message saying the ecu is not responding, please try again.
Fails to unlock map in dtaswin.
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Fails to unlock map in dtaswin.
You have a USB driver issue most likely.
Download the correct version from the website, then follow the update guide also from the website.
Download the correct version from the website, then follow the update guide also from the website.
Re: Fails to unlock map in dtaswin.
Im not using a usb port. I use a laptop with a rs232 connector.
And even i get the message that the ecu is not responding I get the realtime info on rpm tps water temp etc.
And even i get the message that the ecu is not responding I get the realtime info on rpm tps water temp etc.
Re: Fails to unlock map in dtaswin.
Check that you don't have a bent pin in the 15 pin connector.
Re: Fails to unlock map in dtaswin.
All the pins are fine.
This problem came immediately after I changed the settings to use dta droid. Also if I type in the wrong pin code it says I have the wrong pin code. But with the right one it fails to unlock.
This problem came immediately after I changed the settings to use dta droid. Also if I type in the wrong pin code it says I have the wrong pin code. But with the right one it fails to unlock.
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Fails to unlock map in dtaswin.
What version of the software are you using?
Re: Fails to unlock map in dtaswin.
Im using the newest. V85.30.
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Fails to unlock map in dtaswin.
Try 82.16:
http://www.dtafast.co.uk/download_files ... Series.zip
Looks like you've found a bug in the new software.
http://www.dtafast.co.uk/download_files ... Series.zip
Looks like you've found a bug in the new software.
Re: Fails to unlock map in dtaswin.
Ok I will test that tomorrow.
Re: Fails to unlock map in dtaswin.
With the 82.16 software I first get the message. "Map not transferred successfully, Please try again" when i press try again a couple pf times i get the message "Ecu not responding, please try again"
I still get the info on rpm and water temp tps etc.
I still get the info on rpm and water temp tps etc.