Rtcm power control module

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
swsupermoto
Posts: 81
Joined: Fri May 30, 2014 7:36 am
ECU Model: S60 Pro
Distributor: mosley rolling road
Firmware Version: 66

Rtcm power control module

Post by swsupermoto »

Any one using one, trying to find out if it has in built controls for thing like wipers, hazards and light controls. Last 4 builds I've used carter pdm and very happy with them but got a car coming we're there's no room for the panel so need a remote switch pdm. Any advice would be great.
Last edited by swsupermoto on Thu Sep 20, 2018 3:49 pm, edited 1 time in total.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Rtcm

Post by stevieturbo »

And rtcm is ?
swsupermoto
Posts: 81
Joined: Fri May 30, 2014 7:36 am
ECU Model: S60 Pro
Distributor: mosley rolling road
Firmware Version: 66

Re: Rtcm

Post by swsupermoto »

Power control module sold by dta.
Mr Drew
Posts: 62
Joined: Mon Apr 09, 2012 11:08 am
ECU Model: S80 Pro
Firmware Version: 62

Re: Rtcm power control module

Post by Mr Drew »

I haven't used one but have been looking into getting one and having a play with the software. It can do wiper, hazards etc but it all needs to be configured through the software.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Rtcm power control module

Post by Alex DTA »

We've done a couple now. They work well, and I find them pretty easy to set up.
If you download the software from our website, there's an example config included which shows how to set up wipers etc.
The RTCM can also use the 3 lights on the keypads to alert you that there's a problem, or everything is working as normal

The NTDASH already has the CAN data set up to show the outputs from the RTCM, so you can add those as well if required.
There are also icons shipped with the dash to make proper indicator and headlight dashboard layouts, all triggered from the RTCM.
Paul Corbin
Posts: 29
Joined: Mon Jul 16, 2012 8:31 am
ECU Model: No ECU
Firmware Version: 34

Re: Rtcm power control module

Post by Paul Corbin »

Hi Alex, do you sell a 4 pin connector for these and the stickers sheet separately?
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Rtcm power control module

Post by Alex DTA »

Hi Paul

I have the connectors in stock, I've not had any spare sticker sheets. I'll find out if we can get them.
Post Reply