Audi 5 cylinder 10 valve single coil
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Audi 5 cylinder 10 valve single coil
I'll test this tomorrow.
Re: Audi 5 cylinder 10 valve single coil
Hi
have now got it started, have ignored pop up,
has put it to yes to distributor and no to one coil per plug
has got a new problem when it is set up to 5 cylinders, so there is no spark on cylinder 4. But if I put it up to 10 cylinders, it runs on all cylinders,
The firmware of the box is 86.01
have now got it started, have ignored pop up,
has put it to yes to distributor and no to one coil per plug
has got a new problem when it is set up to 5 cylinders, so there is no spark on cylinder 4. But if I put it up to 10 cylinders, it runs on all cylinders,
The firmware of the box is 86.01
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Audi 5 cylinder 10 valve single coil
Leave it set on 10 cylinders then But might run out of dwell time or something or get cross firing in the dizzy. Still can't see why an S40 can't be used if the firmware was right.