Audi 5 cylinder 10 valve single coil

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Audi 5 cylinder 10 valve single coil

Post by Alex DTA »

I'll test this tomorrow.
sogaard
Posts: 8
Joined: Thu May 11, 2017 7:59 am
ECU Model: S60 Pro

Re: Audi 5 cylinder 10 valve single coil

Post by sogaard »

Hi
have now got it started, have ignored pop up,
has put it to yes to distributor and no to one coil per plug

has got a new problem when it is set up to 5 cylinders, so there is no spark on cylinder 4. But if I put it up to 10 cylinders, it runs on all cylinders,
The firmware of the box is 86.01
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Audi 5 cylinder 10 valve single coil

Post by Rob Stevens »

Leave it set on 10 cylinders then :) But might run out of dwell time or something or get cross firing in the dizzy. Still can't see why an S40 can't be used if the firmware was right.
Post Reply