New Throttle Blip on Downshift

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

New Throttle Blip on Downshift

Post by Rob Stevens »

How is this implemented on an S60, there is no mention in the manual or output allocated on the drawing.
Mr Drew
Posts: 62
Joined: Mon Apr 09, 2012 11:08 am
ECU Model: S80 Pro
Firmware Version: 62

Re: New Throttle Blip on Downshift

Post by Mr Drew »

Iirc if you open the shift settings page in dtaswin and click on help it tells you which pin to use.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: New Throttle Blip on Downshift

Post by Alex DTA »

Rob Stevens wrote:How is this implemented on an S60, there is no mention in the manual or output allocated on the drawing.
The manual is in the software now. Just press F1 on any screen and it will take you to the relevant section.

However, you've reminded me I've not updated the manual on the website, which is why you can't find it.
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: New Throttle Blip on Downshift

Post by Rob Stevens »

Ah Aux 6 then. A bit more freedom on the outputs would be nice as I think we need the shared rev counter Doh!
Post Reply