S60 2nd map option

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
iceman_n
Posts: 141
Joined: Mon Jan 16, 2012 1:39 pm
ECU Model: S40 Pro
Firmware Version: 58

Re: S60 2nd map option

Post by iceman_n »

for me now the next question is if i can use lambda switch at the same time as the map2 switch

either enable the switch activation for both in software (using 1 switch for both) or a separate switch for lambda in some other port because map2 shares the port with lambda switch

Alex i just send you my map for check at office@dtafast.co.uk
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: S60 2nd map option

Post by stevieturbo »

If you use the switch for ALS/MAP2, then no it cannot also switch lambda control off and on
iceman_n
Posts: 141
Joined: Mon Jan 16, 2012 1:39 pm
ECU Model: S40 Pro
Firmware Version: 58

Re: S60 2nd map option

Post by iceman_n »

hmmm i see, thanks stevie

so lets wait Alex to see if we can use some other pinout for lambda switch
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: S60 2nd map option

Post by Alex DTA »

No, there's only that switch.
Post Reply