DTASwin rewrite
Re: DTASwin rewrite
maybe you can make the crosshair to become green highlight when its on the center of the box
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: DTASwin rewrite
It's a bit hard to see:
Updated the thickness of the cross hairs:
Updated the thickness of the cross hairs:
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: DTASwin rewrite
Being fussy here but the cross hair now obscures the number could the cross hairs not-go into the active cell perhaps? I know you get the number in the other window however.
Like Alex hasn't got enough to do.
Like prevent oil shut down on HIGH oil pressure ! unless this is fixed now?
Like Alex hasn't got enough to do.
Like prevent oil shut down on HIGH oil pressure ! unless this is fixed now?
Re: DTASwin rewrite
i like the thin green one, maybe you can add the thickness as and option or make a box at the center of the crosshair so the number will be visivle easily and also the box under the crosshair will used as a guide to center the crosshair box
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: DTASwin rewrite
That right there is the problem. If it's big enough to be easily visible, it obscures the number. It's why I used the thinner one to start.Rob Stevens wrote:Being fussy here but the cross hair now obscures the number could the cross hairs not-go into the active cell perhaps? I know you get the number in the other window however.
There are many ways to skin a cat, it's a matter of spending the time on it.
Really? Will test that.Rob Stevens wrote:Like prevent oil shut down on HIGH oil pressure ! unless this is fixed now?
I've heard some people stop work and sleep. I might even have done that once. I think.Rob Stevens wrote:Like Alex hasn't got enough to do.
Re: DTASwin rewrite
Nah - you were obviously Day-dreaming again!Alex DTA wrote:I've heard some people stop work and sleep. I might even have done that once. I think.
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: DTASwin rewrite
I'm not convinced by the light green, but lets see what other feedback we get.
Re: DTASwin rewrite
so now the crosshair is below the box so the numbers would be visible...
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: DTASwin rewrite
No, I've just not centered it in that image. The lines don't go over the current cell that is marked in grey as normal.
-
- Posts: 177
- Joined: Tue May 13, 2014 5:30 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
Re: DTASwin rewrite
Don't know if it's been mentioned already but "manipulate mathmatically" (F5) doesn't work for single cells any more for some reason.