Hi everyone.
I am just having the S40i wired up at the moment. It is being used with a 2.0 9a 16v, 276cams, bit of head work and twin 45 carbs. Does anyone have or know where I can get a map to get me going and drive to the rollers?
Thanks for your help
Adam
VW 16v Base Map
-
- Posts: 1247
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: VW 16v Base Map
The supplied zetec map would do it once you have sorted the crank trigger out as you are on carbs
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: VW 16v Base Map
As Rob says, as long as you have fitted a 36-1 trigger on the engine, all you'll need to alter is the Crank Sensor Angle in General Engine Settings, and it should start on the map shipped in the ECU.
-
- Posts: 2
- Joined: Thu Jan 24, 2019 5:48 pm
- ECU Model: S40 Pro
Re: VW 16v Base Map
Thank you both. Would the car be drivable on this map? It’s 1hrs drive to my rolling road.
Cheers
Cheers