twin injetors
twin injetors
how do I wire on 4 cylinder non sequential S100
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: twin injetors
Inner bank wire to o/p 1-4
Outer bank wire to 6-10
Outer bank wire to 6-10
Re: twin injetors
Cheers Rob ( Andy Bougourd )Rob Stevens wrote:Inner bank wire to o/p 1-4
Outer bank wire to 6-10
Re: twin injetors
Cheers Rob ( Andy Bougourd )Rob Stevens wrote:Inner bank wire to o/p 1-4
Outer bank wire to 6-10
can I use 1 and 2 for inner and 6 and 7 for outer 2 on each as I need 9 and 10 for gear change?
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: twin injetors
But that doesn't make sense as I'm sure I didn't make any wiring changes when I moved from s80 to s100 but it was few years ago.
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: twin injetors
Yes 2 per output is fine
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: twin injetors
Not quite.Rob Stevens wrote:Inner bank wire to o/p 1-4
Outer bank wire to 6-10
Inner injectors go to outputs 1-4
Outer injectors go to outputs 5-8. You can still blend these in then.
You can still use 9 and 10 for paddle shift.
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: twin injetors
Alex, I checked the s100 wiring diagram before responding to Andy and it clearly states 1-5 and 6-10
But as I mentioned I dont recall making any changes from s80 to s100 so something needs correcting
But as I mentioned I dont recall making any changes from s80 to s100 so something needs correcting
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: twin injetors
Hi Rob
So it does. The diagram need updating then.
So it does. The diagram need updating then.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: twin injetors
I was actually going to respond similar to Alex...but waited as was unsure.
I actually got the impression years ago that say if it was a 6 cyl car...it might be outputs 1-3, and then 4-6 for example.
for my V8, 1-4 then 5-8
And I'd guess 10cyl, 1-5, and 6-10 ?
ie, they actually moved with numbers of cylinders ? Although I think the P8 had fixed wiring ?
Or maybe I'm waffling.
I actually got the impression years ago that say if it was a 6 cyl car...it might be outputs 1-3, and then 4-6 for example.
for my V8, 1-4 then 5-8
And I'd guess 10cyl, 1-5, and 6-10 ?
ie, they actually moved with numbers of cylinders ? Although I think the P8 had fixed wiring ?
Or maybe I'm waffling.