Ok I'm wiring the fuel pump on a relay etc from the ecu and just wanted to know if this was the rite way ....4 prong relay
30 from relay goes to fused 12volt positive battery
85 goes to pin ecu
86 goes to ground chassis
87 goes to positive side of fuel pump
And then I ground the other side of fuel pump wire to chassis??
Is that way correct?
Wiring fuel pump relay s60 pro ecu hayabusa
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Wiring fuel pump relay s60 pro ecu hayabusa
30 12v
86 12v
87 to fuel pump other side of pump to ground
85 to ECU fuel pump pin
86 12v
87 to fuel pump other side of pump to ground
85 to ECU fuel pump pin
-
- Posts: 21
- Joined: Thu Dec 14, 2017 4:40 pm
- ECU Model: S100 Pro
- Distributor: DTA UK
- Firmware Version: 79
- Location: France
Re: Wiring fuel pump relay s60 pro ecu hayabusa
Hope a schematic will help
Power side:
30 12v with a fuse to battery
87 to fuel pump other side of pump to ground
Command side:
86 12v from a switched feed
85 to ECU fuel pump pin
All AUX output gives a ground when activated except AUX 5 that output a 12v signal
Power side:
30 12v with a fuse to battery
87 to fuel pump other side of pump to ground
Command side:
86 12v from a switched feed
85 to ECU fuel pump pin
All AUX output gives a ground when activated except AUX 5 that output a 12v signal
Westfield Megabusa 1300 (Hayabusa powered Seven style kitcat and soon with DTA S100 ecu)
-
- Posts: 46
- Joined: Wed Feb 14, 2018 8:05 am
- ECU Model: S60 Pro
- Distributor: creative custom racing Frank
- Firmware Version: 79.06
Re: Wiring fuel pump relay s60 pro ecu hayabusa
Thanks guys got it wired up correctly now