CAN stream right lambda

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
TRN
Posts: 28
Joined: Mon Jul 29, 2013 2:39 pm
ECU Model: S100 Pro
Firmware Version: 89

CAN stream right lambda

Post by TRN »

Hello,

(S100 ECU);
I've got the ana1+2+3 hooked up to analogue inputs, so I'm using pin18 connected to the "launch rpm" rotary. This pin shares the Lambda2 input (that we don't use).

If I set this input to launch rpm, will the input values still be streamed to the CAN stream ("Right Lambda")? In other words, is it possible for me to read/log the current launch rpm pot position? It's no problem if I need a math channel in my datalogger to make sense of the values.

thanks!
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: CAN stream right lambda

Post by Alex DTA »

No. The Right Lambda value is the calculated AFR/Lambda, which isn't calculated if you only have one lambda sensor calculated.
That analogue value is not on the CAN stream
Post Reply