Spare S60 DTA Plug pins

Wiring best practices and loom building technique
Post Reply
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Spare S60 DTA Plug pins

Post by katana »

Hi All.

Just getting to the point of re-pinning my S60 ECU plugs and find i'm 3 pins short! I was sure I had some new but not a scooby where! Has anyone possibly got some new ones or even s/hand ones that have a pig tail of wire that I can splice to? RS have them in packs of 10 at . . . . . HOW MUCH! Like to avoid that if possible. Anyone help please ?
Regards
Ian
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Spare S60 DTA Plug pins

Post by stevieturbo »

£2 for a pack of 5 ?

https://uk.rs-online.com/web/p/automoti ... s/6809705/

Although you also need to buy at least 5 packs.

I had a load from an old Busa loom which could be used for pigtails with OEM crimps.....except after sitting in the garage for some 8 years...I threw them out 2 weeks ago lol. Will check later to see if I kept any of them.

I would have some old ones attached to wires as I've been re-wiring my car now. The crimps are secure....but not pretty, and I think probably soldered as I never had suitable crimpers at the time I did that many years ago.

Could post some of them over ?

Although with post being very slow etc....RS probably easiest option.

On a side note, the T10 crimpers that have been mentioned in the other thread, work superbly for these pins. Although I did slightly enlarge the small round crimp hole in them as it was a little too tight.
Which then ended up being a little loose for very thin wire, so a bootlace style crimper tightened it all up again lol
SMR
Posts: 137
Joined: Tue Jan 16, 2018 9:38 am
ECU Model: S100 Pro
Distributor: DTA
Location: Aberdeen

Re: Spare S60 DTA Plug pins

Post by SMR »

Do an ebay search - pretty sure you can buy sets of pins.
Or try kojaycat.co.uk
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Spare S60 DTA Plug pins

Post by katana »

Steve - more than happy to cover post etc. if you find some? I crimped all my current ones with needle nose pliers, then soldered - i'm too tight to spring for proper crimpers that i'll likely only use once LOL!
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Spare S60 DTA Plug pins

Post by stevieturbo »

email or message me the address.

I'll have something for sure whether pretty or not lol.

Was actually in the garage there but forgot to look for the original ones, but I definitely have a load of DIY ones as I only ripped them out at the weekend so the bins havent been emptied yet.
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Spare S60 DTA Plug pins

Post by katana »

stevieturbo wrote:email or message me the address.

I'll have something for sure whether pretty or not lol.

Was actually in the garage there but forgot to look for the original ones, but I definitely have a load of DIY ones as I only ripped them out at the weekend so the bins havent been emptied yet.
You have Messages! :)
Antral
Posts: 194
Joined: Mon Aug 01, 2011 8:20 am

Re: Spare S60 DTA Plug pins

Post by Antral »

Why not ring Alex at DTA i'm sure he will post you some.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Spare S60 DTA Plug pins

Post by stevieturbo »

Antral wrote:Why not ring Alex at DTA i'm sure he will post you some.

And it'd probably be a lot quicker than me posting lol.

And less distance for it to travel.

I probably wont get a chance to post it til thursday now
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Spare S60 DTA Plug pins

Post by katana »

Guys - whenever is fine, I can complete what I have and add the rest in when received. Thanks for the help.
Post Reply