Can you have flat shift and the paddle shift working at the same time ie if I use gear lever with flat shift or I decide to use the paddle ?
Cheers Paul
Flat shift and paddle shift
Re: Flat shift and paddle shift
Thanks
Alex
Alex
-
- Posts: 58
- Joined: Sun May 27, 2018 3:28 pm
- ECU Model: S80 Pro
- Distributor: DTA Direct
- Firmware Version: 73.01
- Location: Berkshire
Re: Flat shift and paddle shift
so a flat shift switch will still work even if it is also the paddle up? input so both systems work?
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Flat shift and paddle shift
No, you must use the gear position pot to initiate the cut.