Unable to initiate data logging

Give input on tuning as well as any tips and tricks you may have. Also feel free to share base mapping files for various engine types.
Post Reply
peckhs
Posts: 12
Joined: Thu Oct 27, 2022 4:40 am
ECU Model: S40 Pro

Unable to initiate data logging

Post by peckhs »

The data logging feature is grey, and can't be selected.
Can i know how to initiate the data logging function??
Thank you.
Attachments
IMG_20221028_132758.jpg
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Unable to initiate data logging

Post by stevieturbo »

S40 does not datalog, and I do not believe there is a software logging option.
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Unable to initiate data logging

Post by Rob Stevens »

You can save data from the S40 (direct to your pc) when the pc is connected by using the 'real time chart' (in display and test).
only the >S60 have onboard logging.
However the S40 still has a high low recording like rpm and water temp, located in 'Diagnostic display'.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Unable to initiate data logging

Post by stevieturbo »

Someone did have some app or something didn't they that you could stream data to ? It was quite a few years ago ?

Can't recall if it was RS232 or CAN based ?
peckhs
Posts: 12
Joined: Thu Oct 27, 2022 4:40 am
ECU Model: S40 Pro

Re: Unable to initiate data logging

Post by peckhs »

I see.
Thank you for the replies..
Post Reply