What are the differences between a p8 and an s80. I currently have a p8 in my car but have been offered an s80 at sensible money. Is here any advantages and could the map be copied across or would it need re mapping?
Thanks in advance
P8 or s80
-
- Posts: 1247
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: P8 or s80
S80 has some more features, I changed from P8 to S80 (they are the same as s100 and can be upgraded) to get the following features -
* Gear cut by ignition retard, not spark cut
* Closed loop gear cut
* Native 5v Lambda support
* Launch rpm on knob
* Traction aggression on knob
* Native sequential gearbox controller (S100)
* Better connectors and environmental protection
These were the things I was looking for but I'm sure there are many more. The maps are sort of compatible, you just need to ensure everything is filled in correctly, doesn't always work 100%
If this sort of stuff doesn't bother you stick with the P8, buy the bargain S80 and move it on. I imagine there will be a new DTA out an a year or so?
* Gear cut by ignition retard, not spark cut
* Closed loop gear cut
* Native 5v Lambda support
* Launch rpm on knob
* Traction aggression on knob
* Native sequential gearbox controller (S100)
* Better connectors and environmental protection
These were the things I was looking for but I'm sure there are many more. The maps are sort of compatible, you just need to ensure everything is filled in correctly, doesn't always work 100%
If this sort of stuff doesn't bother you stick with the P8, buy the bargain S80 and move it on. I imagine there will be a new DTA out an a year or so?
-
- Posts: 19
- Joined: Sat Nov 26, 2022 3:56 pm
- ECU Model: P8 Pro
- Distributor: Ebay
- Firmware Version: V35
Re: P8 or s80
Hi guys
In P8 Can Audi red coils be used?
Thanks
In P8 Can Audi red coils be used?
Thanks
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: P8 or s80
Yes, but you have to fit a 1k pull up on each coil output.
-
- Posts: 19
- Joined: Sat Nov 26, 2022 3:56 pm
- ECU Model: P8 Pro
- Distributor: Ebay
- Firmware Version: V35
Re: P8 or s80
Thanks Alex
are they good from 1/4 watt?
are they good from 1/4 watt?
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: P8 or s80
Yes, that will be plenty, it's just a signal